RAM 2500 Truck 2WD V8-5.7L VIN D (2004)
Condenser HVAC: Service and Repair
REMOVAL
WARNING: REVIEW THE WARNINGS AND CAUTIONS IN THE FRONT BEFORE PERFORMING THE FOLLOWING OPERATION.
1. Disconnect and isolate the battery negative cable.
2. Recover the refrigerant from the refrigerant system .
A/C Discharge Line - 3.7L Shown, 4.7L/5.7L Typical
3. Remove the nut that secures the discharge line fitting to the condenser inlet port.
4. Disconnect the discharge line from the condenser.
5. Remove the seal from the discharge line fitting and discard.
6. Install plugs in, or tape over the discharge line fitting and condenser inlet port.
7. Remove the plastic cover from the condenser outlet stud.
8. Remove the nut that secures the liquid line fitting to the condenser outlet.
9. Disconnect the liquid line from the condenser.
10. Remove the seal from the liquid line fitting and discard.
11. Install plugs in, or tape over the liquid line fitting and condenser inlet port.
