RAM 2500 Truck 2WD V8-5.7L VIN D (2004)
Evaporator Temperature Sensor / Switch: Service and Repair
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the HVAC housing from the vehicle .
Evaporator Temperature Sensor Wire Connector
3. Disconnect the HVAC wire harness connector from the evaporator temperature sensor.
4. Disassemble the HVAC housing to gain access to the evaporator coil.
Evaporator Temperature Sensor Probe
5. Remove the evaporator temperature sensor probe from the evaporator coil.