RAM 2500 Truck 2WD V8-5.7L VIN D (2004)
3. Lubricate a new rubber O-ring seal with clean refrigerant oil and install it on the rear liquid line fitting. Use only the specified O-ring as it is made
of a special material for the R-134a system. Use only refrigerant oil of the type recommended for the A/C compressor in the vehicle.
4. Connect the liquid line fitting to the evaporator inlet tube.
5. Install the secondary retaining clip onto the spring-lock coupler that secures the liquid line fitting to the evaporator inlet tube.
6. Remove the tape or plugs from the front liquid line fitting and the rear liquid line tube.
7. Lubricate a new rubber O-ring seal with clean refrigerant oil and install it on the front liquid line fitting. Use only the specified O-ring as it is made
of a special material for the R-134a system. Use only refrigerant oil of the type recommended for the A/C compressor in the vehicle.
8. Connect the front liquid line fitting to the rear liquid line tube.
9. Install the secondary retaining clip onto the spring-lock coupler that secures the front liquid line fitting to the rear liquid line tube.
10. Engage the liquid lines to the body retaining clips.
11. Remove the tape or plugs from the liquid line fitting and condenser outlet port.
12. Lubricate a new rubber O-ring seal with clean refrigerant oil and install it on the liquid line fitting. Use only the specified O-ring as it is made of a
special material for the R-134a system. Use only refrigerant oil of the type recommended for the A/C compressor in the vehicle.
13. Connect the liquid line to the condenser outlet port.
14. Install and tighten the nut that secures the liquid line fitting to the condenser. Tighten the nut to 20 Nm (180 in. lbs.).
15. Install the plastic cover onto the condenser outlet stud.
16. If equipped with the diesel engine, install the passenger side battery tray.
17. If equipped with the diesel engine, install the passenger side battery.
18. Reconnect the battery negative cables.
19. Evacuate the refrigerant system.
20. Charge the refrigerant system.
