RAM 2500 Truck 2WD V8-5.7L VIN D (2004)
Tail Light Bulb: Service and Repair
With Cargo Box
REMOVAL
1. Disconnect and isolate the negative battery cable.
2. Remove the tail lamp unit.
3. Remove the lamp back plate from the tail lamp unit.
4. Release the tail lamp bulb locking tabs and remove the bulb from the back plate.
INSTALLATION
1. Install the tail lamp bulb into the lamp back plate.
2. Install the lamp back plate onto the tail lamp unit.
3. Install the tail lamp unit.
4. Reconnect the negative battery cable.