RAM 2500 Truck 2WD V8-5.7L VIN D (2004)
3.
Press PAGE BACK to return to the Select System screen.
4.
Select # 1 - "Engine" from Select System screen.
5.
Press ENTER to continue.
6.
Press the RIGHT ARROW key.
7.
Select # 1 - "Miscellaneous".
8.
Select # 3 - "Check VIN".
9.
Press ENTER to program the VIN.
>
If the vehicle is equipped with SKIM:
a.
Press ENTER to continue.
b.
Press ENTER to continue again.
c.
Enter the vehicle 4-digit PIN.
d.
Press ENTER to continue.
e.
Press ENTER to continue again.
f.
Press ENTER to continue again.
g.
Press ENTER to update VIN.
h.
Press ENTER to continue.
i.
Press ENTER to transfer secret key data.
j.
Press ENTER to continue.
k.
Cycle ignition key to "OFF" position and then back to "ON" position and then press ENTER.
l.
Press any key to continue.
>
If the vehicle is NOT equipped with SKIM:
a.
Enter the 17-digit VIN.
b.
Press ENTER to continue.
c.
Press PAGE BACK.
10.
Select # 1 - "Miscellaneous".
11.
Select # 1 - "Check PCM Odometer".
12.
Press YES if the vehicle has LESS than 50 miles on the odometer or press NO if the vehicle has MORE than 50 miles on the odometer.
13.
Enter current odometer reading and then press ENTER.
14.
Cycle ignition key to "OFF" position and then back to "ON" position and then press ENTER.
15.
Press PAGE BACK.
16.
Press PAGE BACK again.
17.
Select # 2 - "Transmission".
18.
Select # 1 - "Transmission Module".
