RAM 2500 Truck 2WD V8-5.7L VIN D (2004)
PARTS REQUIRED:
REPAIR PROCEDURE:
1. Is this a DR vehicle?
a. Yes >> proceed to Step # 2
b. No >> proceed to Step # 3
2. Has Service Bulletin 14-005-05 been performed on this vehicle?
a. Yes >> proceed to Step # 3
b. No >> Using the procedures outlined on DealerCONNECT/TechCONNECT, remove the throttle body and install the appropriate throttle body
listed in the Parts Required section and proceed to Step # 3
NOTE:
The HB body PCM may not support abort recovery. If this update is interrupted or aborted for any reason, the PCM may be unable to display a flash
part number requiring the PCM to be replaced.
NOTE:
If this flash process on DR bodies is interrupted/aborted, the flash should be restarted.
3. Reprogram the PCM with the latest software.
a. Clear any DTC's that may have been set in other modules due to reprogramming. The wiTECH application will automatically present all DTCs
after the flash and allow the tech to clear them.
4. Type the necessary information on the "Authorized Modification Label and attach it near the VECI label.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
