RAM 2500 Truck 2WD V8-5.7L VIN D (2004)
For detailed information on the operation of the StarSCAN, refer to the Quick Reference documentation provided in the StarSCAN documentation
kit. In addition, more recent information may also be available at the website. Look under "Training Aids" and also under "Download Center >
Frequently Asked Questions" for more help.
1.
Retrieve the old PCM part number. Using the StarSCAN at the "Home" screen:
a.
Select "ECU View"
b.
Touch the screen to highlight the PCM in the list of modules.
c.
Record the "Part Number", displayed on the "ECU Overview" screen, for later reference.
2.
Insert the USB Key, into the USB port on the TechCONNECT or equivalent PC (Fig. 2).
3.
Insert the StarSCAN Software Update CD into the TechCONNECT or equivalent PC. The StarSCAN Software Update CD will start
automatically.
a.
Select "Controller Flash".
b.
Follow the on screen instructions.
4.
At the "Select the type of information you wish to enter." screen:
a.
If the old "Part Number" was recorded in Step # 1, proceed to Step # 5.
b.
If the old "Part Number" is not known, proceed to Step # 6.
5.
Select "Enter part number".
a.
Follow the on screen instructions. Enter the "Part Number" (use capital letters) recorded in Step # 1 when prompted to do so. Follow the on
screen instructions. Select "Next" after each step. Select "Finish" after completing the last step.
b.
Proceed to Step # 7.
6.
Select "Enter YME Information".
a.
Follow the on screen instructions. Select "Next" after each step. Select "Finish" after completing the last step.
