RAM 2500 Truck 2WD V8-5.9L VIN 5 HDC (1998)
Passenger Airbag Disarm Switch Remove/Install
8. Remove the three screws that secure the passenger airbag disarm switch to the switch mounting plate.
9. Remove the passenger airbag disarm switch from the switch mounting plate.
10. Reverse the removal procedures to install. Tighten the mounting screws to 2.2 N.m (20 in. lbs.).
11. Do not connect the battery negative cable at this time. See Airbag System in the Diagnosis and Testing for the proper procedures.
