RAM 2500 Truck 2WD V8-5.9L VIN 5 HDC (1998)
Power Take-Off: Service and Repair
Overhaul
Disassembly
Drain Bolt Location
1. If adapter was not drained during removal, remove drain bolt at bottom of front housing and drain lubricant into drain pan.
Retaining Ring Access Cover Removal
2. Remove mainshaft bearing retaining ring access cover and gasket. Cover must be removed from extension for access to retaining ring. A torx head
bit is required to remove cover screws.
Removing Input Bearing Retainer Bolts
3. Remove input bearing retainer bolts.
