RAM 2500 Truck 2WD V8-5.9L VIN 5 HDC (1998)
Input Bearing Locating Ring Position
1. Start input bearing in front case bore. Verify that locating ring is installed on bearing. Note that bearing can only be installed from case exterior
because of the ring which controls depth of installation.
Input Bearinn Installtion
2. Seat input bearing in case. Use driver Handle C- 4171 and Installer C-4210, 5062, or 7828 to install bearing. Seat bearing until locating ring is
flush against case.
Installing Needle Bearing In Input Gear
3. Install new needle bearing in input gear with Driver Handle C-4171 and Installer 5065.
