RAM 2500 Truck 2WD V8-5.9L VIN 5 HDC (1998)
12. Install retaining ring on input gear. Be sure ring is fully seated in gear groove.
13. Remount front case on wood blocks.
Assembling Shift Fork And Sleeve
Shift Fork And Sleeve Installation
14. Assemble shift fork and sleeve. Then install fork and sleeve. Be sure sleeve is seated in input gear.
Inserting Shift Fork Pin In Sector Slot
15. Align and install shift fork pin in sector slot.
16. Align shift sleeve in input gear and align shift fork with shift rail bore in case.