RAM 2500 Truck 2WD V8-5.9L VIN 5 HDC (1998)
Installing Rear Extension On Front Case
26. Align and install rear extension on front case.
27. Install one or two extension-to-front case bolts to hold assembly together. Be sure dowels are aligned in extension before hand tightening bolts.
28. Remove adapter assembly from wood blocks and place assembly in horizontal position on workbench.
29. Seat output bearing retaining ring as follows:
Seating Bearing Retaining Ring
a. Reach in access cover opening in rear extension with snap ring pliers.
b. Spread retaining ring with snap ring pliers and seat it in groove of output bearing. If retaining ring is not aligned with bearing groove, tilt front
case upward so mainshaft will move rearward for alignment.
