RAM 2500 Truck 2WD V8-5.9L VIN Z (1997)
Without A/C
10. Install drive belt.
CAUTION: When installing the serpentine accessory drive belt, the belt must be routed correctly. If not, the engine may overheat due to the water
pump rotating in the wrong direction. The correct belt with the correct length must be used.
11. Install air cleaner assembly.
12. Install upper radiator hose to radiator.
13. Connect throttle cable to clip at radiator fan shroud.
14. Connect wiring harness to A/C compressor.
15. Fill cooling system.
16. Start and warm the engine. Check for leaks.
