RAM 2500 Truck 4WD L6-359 5.9L DSL Turbo VIN D FI (1998)
Brake Rotor/Disc: Service and Repair
Rotor Removal and Installation
REMOVAL
1. Raise and support vehicle.
2. Remove wheel and tire assembly.
3. Remove brake caliper.
4. Remove rotor from hub bearing.
INSTALLATION
1. Install rotor on hub bearing.
2. Install brake caliper
3. Install wheel and tire assemblies.
4. Remove support and lower vehicle.
5. Apply brakes several times to seat brake shoes and caliper piston. Do not move vehicle until firm brake pedal is obtained.
