RAM 2500 Truck 4WD L6-359 5.9L DSL Turbo VIN D FI (1998)
Piston Ring Installation Tool
11. Install the top piston ring in the top groove.
Piston Ring Positioning
12. Position the rings as shown.
Connecting Rod Bearing Size Location
13. Install the original bearings as removed or install new bearings. If new bearings are used, be sure to obtain the proper bearing clearance.
14. DO NOT lubricate the side of the bearing that is against the connecting rod or cap. Apply a coat of Lubriplate 105, or equivalent to the new upper
and lower connecting rod bearings.
