RAM 2500 Truck 4WD L6-359 5.9L DSL Turbo VIN D FI (1998)
2. Install generator mounting fasteners and tighten as follows:
-
Generator mounting bolt-All gas powered engines-41 N.m (30 ft. lbs.)
-
Generator pivot bolt/nut-All gas powered engines-41 N.m (30 ft. lbs.)
-
Generator mounting bolt-Diesel powered engines-54 N.m (40 ft. lbs.)
-
Generator pivot bolt/nut-Diesel powered engines-54 N.m (40 ft. lbs.)
CAUTION:
-
Never force a belt over a pulley rim using a screwdriver. The synthetic fiber of the belt can be damaged.
-
When installing a serpentine accessory drive belt, the belt MUST be routed correctly. The water pump will be rotating in the wrong direction if
the belt is installed incorrectly, causing the engine to overheat.
3. Install generator drive belt.
4. Install negative battery cable(s) to battery(s).