RAM 2500 Truck 4WD L6-359 5.9L DSL Turbo VIN D FI (1998)
Transmission Water-To-Oil Cooler-Diesel
6. Remove oil cooler mounting straps.
7. Lift oil cooler off of mounting bracket.
8. If replacing cooler, make sure to transfer converter drain back valve to new cooler.
INSTALLATION
1. Position oil cooler on bracket.
2. Install mounting straps.
3. Connect transmission oil lines to cooler.
4. Connect coolant hoses to cooler.
5. Connect battery negative cables.
6. Fill cooling system. Refer to Refilling Cooling System.
7. Check transmission oil level and fill as necessary.
8. Install air cleaner assembly and air cleaner intake hoses.
