RAM 2500 Truck 4WD L6-5.9L DSL Turbo VIN 6 (1999)
Front Brake Hose Attachment
Front Brake Hose Routing - 4x4
4. Install brake hose to caliper with new seal washers and tighten fitting bolt to 24 Nm (18 ft. lbs.).
CAUTION: Verify brake hose is not twisted or kinked before tightening fitting bolt.
5. Bleed base brake system.
6. Install wheel and tire assemblies.
7. Remove supports and lower vehicle.
8. Verify firm pedal before moving vehicle.