RAM 2500 Truck 4WD L6-5.9L DSL Turbo VIN 6 (1999)
Measuring Rocker Arm Bore
Measuring Rocker Arm Shaft
1. Remove rocker shaft and inspect for cracks and excessive wear in the bore or shaft. Remove socket, and inspect ball insert and socket for signs of
wear. Replace retainer if necessary. Measure the rocker arm bore and shaft.
Push Rods
Inspecting Push Rod For Cracks
Inspect the push rod ball and socket for signs of scoring. Check for cracks where the ball and the socket are pressed into the tube.