RAM 2500 Truck 4WD L6-5.9L DSL Turbo VIN 6 (1999)
Drive Belt Tensioner: Description and Operation
Correct accessory drive belt tension is required to be sure of optimum performance of belt driven engine accessories. If specific tension is not
maintained, belt slippage may cause; engine overheating, lack of power steering assist, loss of air conditioning capacity, reduced generator output rate
and greatly reduced belt life.
It is not necessary to adjust belt tension on any engine. All engines are equipped with an automatic belt tensioner. The tensioner maintains correct belt
tension at all times. For other tensioner information and removal/installation procedures, refer to Drive Belt Tensioner. Due to use of this belt
tensioner, do not attempt to use a belt tension gauge on any engine.
AUTOMATIC BELT TENSIONER
Belt Tensioner-3.9L V-6 Or 5.2/5.9L V-8 LDC-Gas Engines
Belt Tensioner-5.9L HDC-Gas And 8.0L V-10 Engines