dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Fuel Pump Relay > < Engine - Low Power/Poor Performance Diagnosis|Page 3528
Page 1
background image

Fuel Pressure: Specifications

Fuel Transfer (Lift) Pump Pressure

Engine running ........................................................................................................................................................................  69 kPa (10 psi) Minimum
Engine cranking ...................................................................................................................................................................  48 kPa (5 - 7 psi) Minimum

Fuel Injector "Pop Off" Pressure

Using injector tester .............................................................................................................................................................  31,026 kPa (4500 ± 250 psi)

Fuel Injector Leak-Down Pressure ........................................................................................  Approximately 20 bars (291 psi) lower than pop pressure.

Fuel Pressure Drop

Across fuel filter test ports (at 2500 rpm)...................................................................................................................................  35 kPa (5 psi) maximum

Overflow Valve Release Pressure

At 2500 rpm ..............................................................................................................................................................................................  97 kPa (14 psi)

Fuel Pump Relay > < Engine - Low Power/Poor Performance Diagnosis|Page 3528