RAM 2500 Truck 4WD L6-5.9L DSL Turbo VIN 6 (1999)
Fig. 2
Engine speed (rpm) is the main factor in determining the maximum allowable operating angle. As a guide to the maximum normal operating angles
refer to.
Precautions
Use the exact replacement parts when installing the propeller shafts. The use of the correct replacement parts helps to ensure safe operation. All
fasteners must be torqued to the specified values for safe operation
Fig. 3
Also make alignment reference marks on the propeller shaft yoke and axle, or transmission, yoke prior to servicing. This helps to eliminate possible"
vibration.:
CAUTION: Do not allow the propeller shaft to drop or hang from any propeller shaft joint during removal. Attach the propeller shaft to the vehicle
underside with wire to prevent damage to the joints.
CAUTION: It is very important to protect the external machined surface of the slip yoke from damage during and after propeller shaft removal. If the
yoke is damaged, the transmission extension seal may be damaged and therefore cause a leak.