RAM 2500 Truck 4WD L6-5.9L DSL Turbo VIN 6 (1999)
Seals and Gaskets: Service and Repair
Removal
1. On 4X2 vehicles, remove the propeller shaft.
2. On 4X4 vehicles, remove the transfer case.
3. On 4X2 vehicles, remove extension housing seal with a suitable pry tool or a slide hammer mounted screw.
Fig. 16
4. On 4X4 vehicles, use a suitable pry tool, or a slide hammer mounted screw, to remove the adapter housing seal.
Fig. 17
5. Remove the extension housing bushing with Remover 8155.
Installation
