RAM 2500 Truck 4WD L6-5.9L DSL Turbo VIN 7 (2001)
Front Bumper Cover / Fascia: Service and Repair
FRONT FASCIA
REMOVAL
ST/SLT/SLT+ - FASCIA REMOVAL
Fig. 3
1. Remove the two screws at each trailing edge of the fascia. (Fig. 3)
2. Using a trim stick C-4755 or equivalent, carefully release the six lower clips and remove the close out panel.
3. Using a trim stick C-4755 or equivalent, carefully remove the step pad.
4. Remove and discard the four push pin fasteners and remove the fascia.
SPORT FASCIA REMOVAL
1. Raise and support the vehicle.