RAM 2500 Truck 4WD L6-5.9L DSL Turbo VIN 7 (2001)
Console: Procedures
Overhead Console Replacement
REMOVAL
1. Disconnect and isolate the battery negative cable.
Fig.4 Overhead Console Latch Tabs
2. Open the garage door opener storage bin door and locate the two overhead console latch tabs near the front of the bin.
3. While pulling gently downward on the front of the overhead console, push the latch tabs forward until each latch is disengaged from its receptacle
in the inner roof panel.
Fig.5 Overhead Console Remove/Install
4. Slide the overhead console rearward far enough to disengage the two mounting hooks on the rear of the housing from the mounting holes in the
inner roof panel.
5. Lower the overhead console from the headliner far enough to access the wire harness connector.
6. Disconnect the roof wire harness connector from the overhead console wire harness connector.
