RAM 2500 Truck 4WD L6-5.9L DSL Turbo VIN 7 (2001)
5. Remove the caliper slide bolts (3).
6. Remove the caliper (6) from vehicle.
7. Remove the caliper adapter bolts.
8. Remove the rear axle shaft from the housing on dual rear wheels.
9. Remove the hub and rotor assembly (C3500 only).
REAR - SRT-10
1. Compress the disc brake caliper using tool #C4212F.
2. Remove the caliper pin bolts (3).
3. Remove the banjo bolt (6) and discard the copper washer.
CAUTION: Never allow the disc brake caliper to hang from the brake hose. Damage to the brake hose with result. Provide a suitable support to hang
the caliper securely.
4. Remove the rear disc brake caliper.
INSTALLATION
REAR DUAL WHEELS
