RAM 2500 Truck 4WD L6-5.9L DSL Turbo VIN 7 (2001)
1. Install the hub to the rotor. Tighten the bolts (1) to 128 Nm (95 ft. lbs.).
2. Install the hub and rotor assembly.
3. Install the rear axle shaft to the housing with dual wheels.
4. Install the caliper adapter bolts 197 Nm (145 ft. lbs.) LD.
5. Install the disc brake caliper.
INSTALLATION
REAR - SRT-10
NOTE: Install a new copper washers on the banjo bolt when installing
1. Install the rear disc brake caliper.
1. Ant-rattle clips
2. Disc Brake Caliper Adapter
3. Caliper slide Pin bolts
4. Caliper Adapter Bolts
