RAM 2500 Truck 4WD L6-5.9L DSL Turbo VIN 7 (2001)
29. Remove the camshaft (Fig. 91) and thrust plate.
INSPECTION
Camshaft
1. Inspect the valve lobes and bearing journals for cracks, pitting, scoring, or generally excessive wear. Replace any camshaft that exceeds the
allowable limits.
2. Measure the bearing journals and lobes (Fig. 92).
CAUTION: If Camshaft lobes are worn, requiring camshaft replacement, it it necessary to replace the tappets also.
Camshaft Bushing/Bores
Camshaft bores No. 2-7 do not use a bushing.
1. Inspect the camshaft bushing and bores for signs of excessive wear.