RAM 2500 Truck 4WD L6-5.9L DSL Turbo VIN 7 (2001)
Tail Lamp: Service and Repair
Tail Lamp Replacement
REMOVAL
Chassis Cab
1. Disconnect and isolate the battery negative cable.
2. Remove screws holding tail lamp lens to lamp body.
3. Separate lens from lamp.
4. Grasp bulb, push in slightly and rotate 1/2 turn counter-clockwise.
Pickup
1. Disconnect and isolate the battery negative cable.
2. Remove screws from tail lamp.
3. Grasp lamp, firmly pull lamp rearward to disengage retaining studs.
4. Remove socket from tail lamp.
5. Separate tail lamp from cargo box.
6. Pull bulb from socket.
INSTALLATION
Chassis Cab
1. Install bulb in socket.
2. Install lamp lens.
3. Connect the battery negative cable.
Pickup
1. Install bulb in socket.
2. Install socket in tail lamp.
3. Position tail lamp in cargo box, engage retaining studs and install screws.
4. Connect the battery negative cable.