dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

ABOUT US
Manifold Absolute Pressure (MAP) Sensor <--> [Manifold Pressure/Vacuum Sensor] > < Intake Air Temperature (IAT) Sensor <--> [Intake Air Temperature Sensor]|Specifications|Page 2657

RAM 2500 Truck 4WD L6-5.9L DSL Turbo VIN 7 (2001)

Page 2
background image

INSTALLATION

1. Clean sensor mounting hole of rust or contaminants.
2. Install new O-ring to sensor. Apply clean engine oil to sensor O-ring and sensor threads.
3. Install IAT sensor into intake manifold. Tighten to 14 Nm (10 ft. lbs.) torque.
4. Connect sensor electrical connector.

Manifold Absolute Pressure (MAP) Sensor <--> [Manifold Pressure/Vacuum Sensor] > < Intake Air Temperature (IAT) Sensor <--> [Intake Air Temperature Sensor]|Specifications|Page 2657