RAM 2500 Truck 4WD L6-5.9L DSL Turbo VIN 7 (2001)
Control Arm: Service and Repair
Upper
UPPER CONTROL ARM
REMOVAL
1. Raise and support the vehicle.
2. Remove the upper suspension arm nut and bolt at the axle bracket.
3. Remove the nut and bolt at the frame rail and remove the upper suspension arm.
INSTALLATION
1. Position the upper suspension arm at the axle and frame rail.
2. Install the bolts and finger tighten the nuts.
3. Remove the supports and lower the vehicle.
4. Tighten nut at the axle bracket to 163 Nm (120 ft. lbs.). Tighten nut at frame bracket to 163 Nm (120 ft. lbs.).
