RAM 2500 Truck 4WD L6-5.9L DSL Turbo VIN 7 (2001)
Examine the overdrive piston retainer carefully for wear, cracks, scoring or other damage. Be sure the retainer hub is a snug fit in the case and drum.
Replace the retainer if worn or damaged.
Assembly
ASSEMBLY
1. Temporarily install overdrive piston retainer in case. Use 3-4 bolts to secure retainer.
2. Align and start new clutch cam in the transmission case. Be sure serrations on cam and in case are aligned (Fig. 181). Then tap cam into case just
enough to hold it in place.
3. Verify that cam is correctly positioned before proceeding any further. Narrow ends of cam ramps should be to left when cam is viewed from front
end of case (Fig. 181).
4. Insert Adapter Tool SP-5124 into piston retainer (Fig. 182).
