RAM 2500 Truck 4WD L6-5.9L DSL Turbo VIN 7 (2001)
3. Install E-clips on the shift motor shaft and housing.
INSTALLATION
1. Install shift motor housing gasket and cover. Ensure shift fork is correctly guided into the shift collar groove.
2. Install shift motor housing shield and tighten the bolts to 11 Nm (96 inch lbs.).
3. Add 148 ml (5 ounces) of API grade GL 5 hypoid gear lubricant to the shift motor housing. Add lubricant through indicator switch mounting hole.
4. Install indicator switch, electrical connector and vacuum harness.
