RAM 2500 Truck 4WD L6-5.9L DSL Turbo VIN 7 (2001)
4. Install a new pinion seal with an appropriate installer (Fig. 53).
NOTE: Pinion depth shims are placed between the rear pinion bearing cone and pinion gear to achieve proper ring and pinion gear mesh. If ring
and pinion gears are reused, the pinion depth shim should not require replacement. If the ring and pinion gears are replaced refer to Adjustments
(Pinion Gear Depth to select the proper thickness shim.
5. Place the proper thickness pinion depth shim on the pinion gear.
6. Install rear bearing and oil slinger, if equipped on the pinion gear with Installer C-3095-A and a press (Fig. 54).
7. Install original solid shims on pinion gears.
