RAM 2500 Truck 4WD L6-5.9L DSL Turbo VIN 7 (2001)
15. Remove rear bearing from the pinion with Puller/Press C-293-PA and Adapters DD-914-95 (Fig. 49).
Place 4 adapter blocks so they do not damage the bearing cage.
16. Remove the pinion depth shims from the pinion gear shaft. Record the total thickness of the depth shims.
INSTALLATION
1. Apply Mopar Door Ease stick lubricant to outside surface of bearing cup. Install the pinion rear bearing cup with Installer C-4204 and Handle
C-4171 (Fig. 50) and verify cup is seated.