RAM 2500 Truck 4WD L6-5.9L DSL Turbo VIN 7 (2001)
16. Remove the rear bearing from the pinion with Puller/Press C-293-PA and Adapters C-293-37 (Fig. 55).
Place 4 adapter blocks so they do not damage the bearing cage.
17. Remove the pinion depth shims from the pinion gear shaft. Record the total thickness of the depth shims.
INSTALLATION
1. Apply Mopar Door Ease stick lubricant to outside surface of bearing cup. Install the pinion rear bearing cup with Installer D-111 and Handle
C-4171 (Fig. 56). Ensure cup is correctly seated.