RAM 2500 Truck 4WD L6-5.9L DSL Turbo VIN 7 (2001)
1. Apply Mopar Door Ease stick lubricant to outside surface of bearing cup. Install the pinion rear bearing cup with Installer D-111 and Handle
C-4171 (Fig. 56). Ensure cup is correctly seated.
2. Apply Mopar Door Ease stick lubricant to outside surface of bearing cup. Install the pinion front bearing cup with Installer D-146 and Handle
C-4171 (Fig. 57).
3. Install pinion front bearing and oil slinger, if equipped. Apply a light coating of gear lubricant on the lip of pinion seal.
