RAM 2500 Truck 4WD L6-5.9L DSL Turbo VIN 7 (2001)
4. Install the inner axle seal (Fig. 25).
5. Install the shift collar in the axle housing.
6. Lubricate the splined end of the intermediate axle shaft with multi-purpose lubricant.
7. Insert the intermediate axle shaft into the differential side gear.
CAUTION: Apply all-purpose lubricant to the axle shaft splines to prevent damage to the seal during axle shaft installation.
8. Insert the axle shaft into the tube. Engage the splined end of the shaft with the shift collar.
9. Install the vacuum shift motor housing.