RAM 2500 Truck 4WD L6-5.9L DSL Turbo VIN 7 (2001)
Seals and Gaskets: Service and Repair
216 RBI Axle
REMOVAL
1. Remove hub bearings and axle shafts.
2. Remove axle shaft seal from the differential housing with a long drift or punch. Be careful not to damage housing.
3. Clean the inside perimeter of the differential housing with fine crocus cloth.
INSTALLATION
1. Apply a light film of oil to the inside lip of the new axle shaft seal.
2. Install inner axle seal (Fig. 26).
3. Install axle shafts and hub bearings.
