RAM 2500 Truck 4WD L6-5.9L DSL Turbo VIN C (2004)
3. Connect the quick-connect fittings to the transmission cooler lines.
4. Install Charge Air Cooler.
5. Start the engine and check all fittings for leaks.
6. Check the fluid level in the automatic transmission.
WATER-TO-AIR COOLER
1. Position oil cooler on cylinder block.
2. Install lower mounting bolt to cooler at the cylinder block. Torque bolt to 77 Nm (57 ft. lbs.)
3. Install upper mounting bolt at the cylinder block. Torque bolt to 24 Nm (19 ft. lbs.)
4. Install cooler bracket to transmission adapter bolt. Tighten to 24 Nm (18 ft. lbs.).
5. Connect transmission oil lines to cooler.
6. Connect coolant hoses to cooler.
7. Install starter motor.
8. Connect battery negative cables.
9. Fill cooling system.
10. Check transmission oil level and fill as necessary.
