RAM 2500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Keyless Entry Transmitter: Component Tests and General Diagnostics
REMOTE KEYLESS ENTRY TRANSMITTER
Using special tool 9001, first test to ensure that the transmitter is functioning. Typical testing distance is 2.5 centimeters (1 inch) for Asian transmitters
and 30.5 centimeters (12 inches) for all others. To test, position the transmitter as shown. Press any transmitter button, then test each button
individually. The tool will beep if a radio signal strength that lights five or more LED's is detected. Repeat this test three times. If transmitter fails any of
the test refer to the Diagnostic Procedures information.
