RAM 2500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Front Door Panel: Service and Repair
Side View Mirror Flag
Removal
REMOVAL
1. Remove the door trim panel (4).
CAUTION: Do not use a drill to remove the heat stakes. The remaining portions of the heat stake studs are needed for installation purposes.
Failure to follow this caution may require door trim panel replacement.
2. Remove the heat stakes (3) using a razor knife or equivalent.
3. Release the tabs (2) and remove the mirror flag (1) from the door trim panel.
Installation
INSTALLATION
NOTE: Clean any excess heat stake material off of the heat stake studs to aid in mirror flag installation.
1. Install the mirror flag (1) over the tabs (2) and install the screws (3) into the heat stake studs.