RAM 2500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Rear Door Hinge: Service and Repair
Installation
INSTALLATION
UPPER HINGE
1. Install the hinge to door washers, if there were removed previously, nut (1) and bolt (9) and tighten to 28 Nm (21 ft. lbs.).
2. Tighten the upper hinge bolt (2) to 28 Nm (21 ft. lbs.).
3. Tighten the upper hinge bolt (1) to 28 Nm (21 ft. lbs.).
4. Tighten the upper hinge bolt (3) to 28 Nm (21 ft. lbs.).
5. Adjust the door if needed.
LOWER HINGE
