RAM 2500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Rear Door Striker: Adjustments
ADJUSTMENTS
1. Using a grease pencil or equivalent, mark the location of the door latch striker (1) on the C-pillar (2) to aid in adjustment.
2. Loosen the two bolts (3) that secure the door latch striker to the C-pillar.
3. To adjust the rear gap and flush measurement, change the position of the door latch striker and then tighten the two bolts to 28 Nm (21 ft. lbs.).
4. Verify correct door and latch position.