RAM 2500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Hood Latch Release Cable: Service and Repair
Removal
REMOVAL
1. Remove the hood latch.
2. Remove the battery tray from the left side of the engine compartment.
3. Remove the three hood release cable retainers from the upper radiator crossmember and the left fender rail.
4. From inside the vehicle, remove the two bolts (1) that secure the hood release handle (2) to the instrument panel bracket (3).
5. Remove the grommet (4) from the cowl panel and remove the hood release cable and handle assembly.
