RAM 2500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Sun Visor: Service and Repair
Sun Visor
Removal
REMOVAL
1. Remove the three screws (1) that secure each sun visor (2) to the roof panel and remove the visor from the headliner (3).
2. If equipped, disconnect the wire harness connector for the illuminated vanity mirror (4).
Installation
INSTALLATION
1. If equipped, connect the wire harness connector for the illuminated vanity mirror (4).
2. Position the sun visor (2) onto the headliner (3).
3. Install the three screws (1) that secure each sun visor to the roof panel. Tighten the screws to 2.2 Nm (20 in. lbs.).
