RAM 2500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
4. Install the caliper adapter mounting bolts (5). Tighten the mounting bolts to 176 Nm (130 ft.lbs) LD or Tighten the mounting bolts to 339 Nm
(250 ft.lbs) HD.
5. Install the inboard (4) and outboard (2) pads.
6. Install the caliper (2) and the caliper slide pin bolts (4).
7. Install the tire and wheel assembly.
Rear
REAR
1. Install the caliper adapter mounting bolts (4). Tighten the mounting bolts to 135 Nm (100 ft.lbs) LD or tighten to 197 Nm (145 ft.lbs.) HD.
2. Install the anti-rattle clips (2).
3. Install the inboard and outboard pads (1).
4. Install the caliper mounting bolts.
5. Install the tire and wheel assembly.
