RAM 2500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
Light Duty (LD)
LIGHT DUTY (LD)
CAUTION: Dirt, oil, and solvents can damage caliper seals. Insure assembly area is clean and dry.
1. Lubricate caliper pistons, piston seals and piston bores with clean, fresh brake fluid.
NOTE: Verify seal is fully seated and not twisted.
2. Install new piston seals (2) into caliper bores (1).
3. Leave boot (1) dry and slip onto end of piston (2).