RAM 2500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
3. Install the valve (2), springs (4), and retainer (5).
4. Install the valve spring compressor tool 8319-A (1) as shown.
5. Compress the valve springs and install the valve retaining locks.
6. Remove the compressor and repeat the procedure on the remaining cylinders.
7. Install new o-ring and sealing washer on injector.
8. Lubricate o-ring and injector bore.
9. Verify sealing washer (shim) was removed with old injector.
10. Install injector.
11. Install the cylinder head.
