RAM 2500 Truck 4WD L6-6.7L DSL Turbo VIN A (2007)
11. Remove the bracket (3) from the transmission.
Installation
INSTALLATION
CAUTION: If replacing a engine mount / bracket, be certain to inspect all other engine mounts / brackets in the system. Failure to follow this
caution may result in damage to the vehicle.
1. If removed, position the brackets to the transmission. Install attaching fasteners (1, 2), Do not tighten at this time..
2. Position support cushion (5) to transmission support bracket (3). Install stud nuts (4) and tighten to 61 Nm (45 ft. lbs.) torque.
3. Position assembled support cushion (5) and bracket (3) to transmission.
4. Install the support bracket bolt (7) and tighten to 54 Nm (40 ft. lbs.) torque.